An innovative solution to prevent
battery drainage

Easy installation

The ANBI Battery Switch eliminates drainage of stored power by isolating the battery and is easy to install.

Conserve Battery

The ANBI Battery Switch conserves battery

Secure your vehicle

The ANBI Battery Switch secures your vehicle and its battery as well.

Our Products

Introducing the Anbi switch™

The ANBI Battery Switch eliminates drainage of stored power by isolating the battery from power-hungry components like clocks, and general energy leakage. Installation is quick and easy and can be completed in less than 15 minutes.

Even when your ignition key is off, there are still components that draw current and continue to drain your battery. That’s why it’s common to find it flat when you to go to start a vehicle, like a boat, classic car, or ride-on mower after it’s been sitting for an extended period of time.

This is both inconvenient and costly as a completely flat dead battery can often become damaged if left uncharged for an extended period. The ANBI Switch™ is a simple, high quality, robust solution to help you avoid flat batteries.

ANBI also provides a theft deterrent by virtually immobilising the vehicle when activated. This can result in significant savings on insurance premiums.

  • Simple installation
  • Suitable for a wide range of applications
  • Proven anti-corrosive. Exceeds international standards for salt and sea spray.
  • Accelerated life tested for proven durability
  • Conforms to Australian Design Regulations 42 – 00, 01, 02, 03 04
  • Designed and manufactured in Australia

Make sure your steed is ready to go when you are, install an ANBI Battery Switch today.

 

Installation

Select a vehicle to view our installation guide

  • RIDE ON MOWER APPLICATIONSRIDE ON MOWER APPLICATIONS
  • CARAVAN & CAMPER APPLICATIONSCARAVAN & CAMPER APPLICATIONS
  • GOLF CART APPLICATIONSGOLF CART APPLICATIONS
  • MOTORCYCLE & ATV APPLICATIONSMOTORCYCLE & ATV APPLICATIONS
  • JET SKI APPLICATIONSJET SKI APPLICATIONS
  • AUTOMOTIVE APPLICATIONSAUTOMOTIVE APPLICATIONS
  • Boating & Marine ApplicationsBoating & Marine Applications

RIDE ON MOWER APPLICATIONS

  1. Disconnect the battery adaptor and discard.
  2. Using the M8 bolt and washer, fix the earth lead to the sliding panel of the ANBI Switch.
  3. Place the M6 washer on the bolt, then slide them through the earth post hole.
  4. With the label facing out, screw the bolt into the fixed panel of the ANBI Switch until securely fastened.

CARAVAN & CAMPER APPLICATIONS

  1. Detach the battery adaptor and discard.
  2. Using an M8 bolt, M8 washer and Nyloc nut, attach the original battery cable to the sliding panel on the ANBI switch.
  3. Attach the extension bracket to the top of the fixed panel of the switch assembly using the short M6 x 10mm bolt and washer.
  4. A) Where the earth terminal is a threaded hole in the battery, fix the extension bracket using the existing bolt and washer.
    B) Where the earth terminal is an exposed metal thread, install the extension bracket using the M8 nut and M8 washer supplied with the battery.
  5. ANBI switch can now be fixed to the top of the battery using the adhesive pad on the bottom of the switch assembly.

GOLF CART APPLICATIONS

  1. Disconnect the battery adaptor and discard.
  2. Using the M8 bolt and washer, fix the earth lead to the sliding panel of the ANBI Switch.
  3. Place the M6 washer on the bolt, then slide them through the earth post hole.
  4. With the label facing out, screw the bolt into the fixed panel of the ANBI Switch until securely fastened.

MOTORCYCLE & ATV APPLICATIONS

  1. Detach the battery adaptor and discard.
  2. Remove earth terminal and discard.
  3. Fix the earth lead to the sliding panel using the M6 bolt, washer and nyloc nut.
  4. Remove the backing from the adhesive on the base of the ANBI Switch.
  5. Using the M6 bolt with the blank shank and the 3mm M6 washer, screw the fixed panel into the negative terminal.

JET SKI APPLICATIONS

  1. Detach the battery adaptor and discard.
  2. Remove earth terminal and discard.
  3. Fix the earth lead to the sliding panel using the M6 bolt, washer and nyloc nut.
  4. Remove the backing from the adhesive on the base of the ANBI Switch.
  5. Using the M6 bolt with the blank shank and the 3mm M6 washer, screw the fixed panel into the negative terminal.

AUTOMOTIVE APPLICATIONS

  1. Detach earth cable from battery and fix to the terminal on the sliding panel.
  2. Attach switch assembly to the battery earth terminal using the battery adaptor on the fixed panel of the switch.
  3. Remove film from adhesive pad on the bottom of the switch and move switch across to the top of the batteryand press down to gain full adhesion. Ensure area where on the battery, where switch is to be located, is wiped clean.
  4. All nuts/bolts should now be fully tightened.

Boating & Marine Applications

  1. Detach the battery adaptor and discard.
  2. Using an M8 bolt, M8 washer and Nyloc nut, attach the original battery cable to the sliding panel on the ANBI switch.
  3. Attach the extension bracket to the top of the fixed panel of the switch assembly using the short M6 x 10mm bolt and washer.
  4. A) Where the earth terminal is a threaded hole in the battery, fix the extension bracket using the existing bolt and washer. B) Where the earth terminal is an exposed metal thread, install the extension bracket using the M8 nut and M8 washer supplied with the battery.
  5. ANBI switch can now be fixed to the top of the battery using the adhesive pad on the bottom of the switch assembly.